Home | Specials | Sales | Services | Contact Cart | Order Info | Downloads | MicroX | Search | Links | About
Please note, this is our OLD SITE!!!! It should be used for reference only!
To purchase product, please go to our new site at www.modtronix.com!
Products
Netcruzer Boards
PIC MicroX Boards
Presto Boards
LCD Displays
Serial LCD Displays
1-Wire
CAN Bus
Ethernet
RS232
RS485 & RS422
USB
I/O Modules
Batteries & Chargers
Components
Connectors
Hardware
Microcontrollers
• PIC12 & 14
• PIC16
• PIC18
Terminal Blocks
PIC Programmers
Clearance Sale
Archive
Currencies
Shopping Cart more
0 items
Notifications more
NotificationsNotify me of updates to PIC18F24K22-I/SP
Bestsellers
01.PIC18F2520-I/SP
02.PIC18F452-I/L
03.PIC18F2550-I/SP
04.PIC18F2680-I/SP
05.PIC18F252-I/SP
06.PIC18F458-I/L
07.PIC18F258-I/SP
08.PIC18F2320-I/SP
09.PIC18F2410-I/SP
10.PIC18F24K22-I/SP
PIC18F24K22-I/SP US$2.79

Microchip PIC flash microcontroller with 16KByte Enhanced Flash, 768 Ram, 256 Eeprom, 1.8 to 5.5V, 17/10-Bit ADC, 2 Comp, 2 PWM 10-bit, 2 AUSART, I?C, SPI, 64MHz, DIL28.
High Performance RISC CPU:
  • C Compiler optimized architecture/instruction set
  • Data EEPROM to 1024 bytes
  • Linear program memory addressing to 64 Kbytes
  • Linear data memory addressing to 4 Kbytes
  • Up to 16 MIPS operation
  • 16-bit wide instructions, 8-bit wide data path
  • Priority levels for interrupts
  • 31-level, software accessible hardware stack
  • 8 x 8 Single-Cycle Hardware Multiplier Extreme Low-Power Management with nanoWatt XLP?:
  • Sleep mode: 100 nA, typical
  • Watchdog Timer: 500 nA, typical
  • Timer1 Oscillator: 500 nA @ typical 32 kHz Flexible Oscillator Structure:
  • Precision 16 MHz internal oscillator block:
    - Factory calibrated to ? 1%
    - Software selectable frequencies range of 31 kHz to 16 MHz
    - 64 MHz performance available using PLL ? no external components required
  • Four Crystal modes up to 64 MHz
  • Two external Clock modes up to 64 MHz
  • 4X Phase Lock Loop (PLL)
  • Secondary oscillator using Timer1 @ 32 kHz
  • Fail-Safe Clock Monitor:
    - Allows for safe shutdown if peripheral clock stops
  • Two-Speed Oscillator Start-up Special Microcontroller Features:
  • Full 5.5V operation (PIC18F2XK22/4XK22)
  • Low voltage option available for 1.8V-3.6V operation (PIC18LF2XK22/4XK22)
  • Self-reprogrammable under software control
  • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
  • Programmable Brown-out Reset (BOR)
  • Extended Watchdog Timer (WDT) with on-chip oscillator and software enable
  • Programmable code protection
  • In-Circuit Serial Programming? (ICSP?) via two pins
  • In-Circuit Debug via two pins Analog Features:
  • Analog-to-Digital Converter (ADC) module:
    - 10-bit resolution
    - 17 analog input channels (PIC18F/LF2XK22)
    - 28 analog input channels (PIC18F/LF4XK22)
    - Auto acquisition capability
    - Conversion available during Sleep
  • Programmable High/Low Voltage Detection (PLVD) module
  • Charge Time Measurement Unit (CTMU) for mTouch? support:
    - Up to 28 channels for button, sensor or slider input
  • Analog comparator module with:
    - Two rail-to-rail analog comparators
    - Comparator inputs and outputs externally accessible and configurable
  • Voltage reference module with:
    - Programmable On-chip Voltage Reference (CVREF) module (% of VDD)
    - Selectable on-chip fixed voltage reference Peripheral Features:
  • 24/35 I/O pins and 1 input-only pin:
    - High current sink/source 25 mA/25 mA
    - Individually programmable weak pull-ups
    - Individually programmable interrupt-on-pin change
  • Three external interrupt pins
  • Up to seven Timer modules:
    - Up to four 16-bit timers/counters with prescaler
    - Up to three 8-bit timers/counters
    - Dedicated, low-power Timer1 oscillator
  • Up to two Capture/Compare/PWM (CCP) modules
  • Up to three Enhanced Capture/Compare/PWM (ECCP) modules with:
    - One, two or four PWM outputs
    - Selectable polarity
    - Programmable dead time
    - Auto-shutdown and Auto-restart
    - PWM output steering control
  • Two Master Synchronous Serial Port (MSSP) modules with two modes of operation:
    - 3-wire SPI (supports all 4 SPI modes)
    - I2C? Master and Slave modes (Slave mode with address masking)
  • Two Enhanced Universal Synchronous Asynchronous Receiver Transmitter modules (EUSART):
    - Supports RS-232, RS-485 and LIN 2.0
    - Auto-Baud Detect
    - Auto Wake-up on Start bit


This products is a Padded Letter Shippable product - details and shipping costs. If all products checked out are Padded Letter Shippable products, special low shipping costs apply!
For more information, please visit this products webpage.
This product was added to our catalog on Thursday 02 August, 2012.
Reviews
Please note, this is our OLD SITE!!!! It should be used for reference only!
To purchase product, please go to our new site at www.modtronix.com!
Customers who bought this product also purchased
PICkit3-DX
PICkit3-DX
LM35-DZ
LM35-DZ
PIC16F676-I/P
PIC16F676-I/P
LM19-CIZ
LM19-CIZ
PIC18F2550-I/SP
PIC18F2550-I/SP
 
Please note, this is our OLD SITE!!!! It should be used for reference only!
To purchase product, please go to our new site at www.modtronix.com!