Home | Specials | Sales | Services | Contact Cart | Order Info | Downloads | MicroX | Search | Links | About
Please note, this is our OLD SITE!!!! It should be used for reference only!
To purchase product, please go to our new site at www.modtronix.com!
Products
Netcruzer Boards
PIC MicroX Boards
• Bootloader Boards
• CAN Boards
• Display Boards
• RS232 Boards
• RS485 Boards
• USB Boards
• SBC Main Boards
• Prototype Boards
• Ethernet Boards
• I/O boards
• Interface Boards
Presto Boards
LCD Displays
Serial LCD Displays
1-Wire
CAN Bus
Ethernet
RS232
RS485 & RS422
USB
I/O Modules
Batteries & Chargers
Components
Connectors
Hardware
Microcontrollers
Terminal Blocks
PIC Programmers
Clearance Sale
Archive
Currencies
Shopping Cart more
0 items
Notifications more
NotificationsNotify me of updates to IOR5E
Bestsellers
01.IOR5E
02.MXD2R
03.IO8S
04.IOR44-222
05.IOR44-42
06.IOR44-241
IOR5E US$59.95

The IOR5E is an Input-Output-Relay board with an enclosure and a battery backed RTC. It has space for a compact Modtronix SBC board to be mounted as a daughter board. Quantity discounts up to 30% available, for details click here.
Click here for Product Datasheet in PDF format.

  Introduction   Features
  Details, Schematics and Photos   Application Notes and Source Code
  Buy Online   

 Description

The IOR5E is an Input-Output-Relay board with an enclosure and battery backed RTC. It has space for a Modtronix compact SBC board to be mounted as a daughter board. To control the outputs and relays, and read inputs, is has to be used together with a Modtronix compact SBC board. No SBC board is included with the IOR5E! Matching enclosure rear panels are available for the supported SBC board. The SBC board used depends on the type of PIC CPU and interface required. Currently the following Modtronix compact SBC boards can be used together with the IOR5E board and enclosure:

  • SBC65EC: The SBC65EC can be used as the daughter board to enable the IOR5E to be accessed via Ethernet. The "Back view with SBC65PC Daughter board" picture below shows what the back of the enclosure looks like when this SBC board and it's matching enclosure rear panel are used. The "Front panel for SBC65EC Daughter board" picture below shows the enclosure rear panel that is used with the SBC65EC.

  • SBC68EC: The SBC68EC can be used as the daughter board to enable the IOR5E to be accessed via Ethernet. The "Back view with SBC65PC Daughter board" picture below shows what the back of the enclosure looks like when this SBC board and it's matching enclosure rear panel are used. The "Front panel for SBC65EC Daughter board" picture below shows the enclosure rear panel that is used with the SBC65EC.

  • SBC28PC-IR2: The SBC28PC-IR2 can be used as the daughter board to enable the IOR5E to be accessed via RS232 or CAN BUS. The "Back view with SBC28PC Daughter board" picture below shows what the back of the enclosure will look like when this SBC board and it's matching enclosure rear panel are used. Seeing that this SBC board can be configured for RS232 or CAN BUS, it can be used together with either the RS232 or CAN BUS enclosure rear panel.

  • SBC28PC-IR4: The SBC28PC-IR4 can be used as the daughter board to enable the IOR5E to be accessed via RS485 or CAN BUS. The "Back view with SBC28PC Daughter board" picture below shows what the back of the enclosure will look like when this SBC board and it's matching enclosure rear panel are used. Seeing that this SBC board can be configured for RS485 or CAN BUS, it can be used together with either the RS485 or CAN BUS enclosure rear panel.
Any use of this module is at your own risk! Always take necessary safety precautions when working with high voltages to prevent electrical shock! Modtronix Engineering will take no responsibility for any damage or personal injury incurred due to using this unit with high voltages!

 Features
  • Fully assembled and delivered with enclosure and screws
  • Compact size enclosure, 130mm long, 100mm wide, 30mm high
  • 5 Relay outputs rated at 30V. Relays are rated at 7A at 250VAC. All relay outputs have 3 terminals, Normally closed, Common and Normally Open. Using the relay outputs for voltages higher than 30V is at your own risk! Modtronix Engineering will take no responsibility for any damage or personal injury incurred due to using this unit!
  • 4 Opto isolated inputs rated at 30V. Opto coupler ICs are rated at 5300 VAC input isolation. The inputs are all diode protected. The opto couplers are all socketed, and can be replaced if damaged. They switch on at approximately 2V, and have been tested to voltages up to 50V. Using the opto coupler inputs for voltages higher than 30V, placing external resistor in series with the opto inputs to use higher voltages or making any other modifications to this unit is at your own risk! Modtronix Engineering will take no responsibility for any damage or personal injury incurred due to using this unit!
  • 5 Analog or Digital inputs (5V or 26V). Inputs 1 to 5 are connected to port pins A0, A1, A2, A3 and A5 of the SBC board. These ports are analog inputs on most PIC processors, and can thus be used as Analog or Digital input.
  • 1 Counter or Digital input (5V). Input 6 is connected to port pins A4 of the SBC board. A4 is connected to PIC Timer0's clock input on most PIC processors, and can thus be used as a Digital or Counter input.
  • 6 Digital outputs (5V). Inputs 1 to 6 can alternatively be used as digital outputs! Each output has a 2k2 series resistor.
  • Inputs 1 to 4 can be configured via straps to be 5V or 26V inputs
  • Resistor dividers on inputs 1 to 4 uses high accuracy 0.25% resistors
  • All connectors use 8A pluggable 3.81mm screw type terminal blocks, and can easily be plugged in to the module. The IOR5E is supplied with all terminal block plugs fitted!
  • Software controlled LED for power indication
  • 15 Software controlled LEDs for indicating the status of all Relays, Inputs and Outputs
  • Assembled with high accuracy 20ppm RTC 32.432kHz crystal
  • Battery holder for RTC backup battery. Typical battery life will be about 10 years.
  • IC socket for assembling DS1307 real time clock
  • 3 pin molex connector for accessing RS232 signal on SBC daughter board. A CAB3S6FT Serial Port Cable is required to connect to a DTE serial port (like the serial port on a PC).

 Details, Schematics and Photos
Click here for Product Datasheet in PDF format.

The shipped product is basically as shown in the picture below, without the RTC and battery assembled. The enclosure top is not shown, but is of course also included and screwed on.

Typical additional components purchased with this product will be a compact SBC board (SBC65EC or SBC28PC for example) and a matching enclosure rear panel. For example, to build an internet accessible Relay-Input-Output module you can combine the IOR5E with a SBC65EC single board computer and an for the SBC65EC (add as option below). The SBC65EC board will plug into the IOR5E board (used as a daughter board), and the enclosure rear panel fits into the enclosure and has cutouts for the SBC65EC's connectors to fit through. With these 3 components (IOR5E, SBC65EC and enclosure rear panel for SBC65EC) you will then have a professional Relay-Input-Output module in an enclosure.

You will have to write your own software for driving the outputs and reading the inputs on the IOR5E and program this new code onto the selected SBC board. Sample code is provide on our forum. Details of programming Modtronix PIC based SBC boards is here.


Additional photos - click on image to enlarge!


Front View (Old photo, new panels are black and gold!)


Inside View


Inside view with SBC65EC Daughter board


Inside view with SBC28PC Daughter board


Back view with SBC65EC Daughter board (Old photo, new panels are black and gold!)


Back view with SBC28PC Daughter board (Old photo, new panels are black and gold!)
   


Network Rear Panel, use with Ethernet daughter boards like the SBC65EC or SBC68EC


CAN BUS Rear Panel, use with CAN BUS daughter boards like the SBC28PC-IR4 or SBC28PC-IR2


RS485 Rear Panel, use with RS485 daughter boards like the SBC28PC-IR4


RS232 Rear Panel, use with RS232 daughter boards like the SBC28PC-IR2

 Application Notes and Source Code
  Web PDF Data
Schematics and PCB layout
IOR5E Forum  
Programming Modtronix PIC based boards  
  • Additional source code and user contributions for this board is located on our file download page. If anyone has any code they would like to contribute, please upload it onto our file download page for other users!
  • There is also a forum for the Modtronix site.

 Buy Online
This product consists of:
  • IOR5E PCB fully assembled and tested as shown in downloadable schematics above. Note that the RTC and battery are optional, and are NOT fitted. Apart from that, all other components shown in the schematics have been fitted (opto couplers, ULN2003 relay driver,...).
  • One 8 pin and two 12 pin terminal block connectors (3.81mm plug) are fitted to the 3 I/O connectors on the unit. Additional connectors can be purchased separately here.
  • Mounted with 4 screws in a plastic enclosure as show in pictures above.
  • Includes an enclosure Front Panel as shown in the picture above.
The following is Not included, and can be added as options below:
  • RTC (DS1307 Real Time Clock chip) and Battery
  • Serial cable. Is not essential, but can be used for serial communication to PC.
  • The Enclosure Rear Panel ( , , or ) required for the back of the unit has to be added below as an option! It is not included!
Select desired options, and then click on Add to Cart icon below!
Available Options:
Battery:
CAB3S6FT Serial Port Cable (info):
Enclosure Rear Panel (Face Plate):
RTC:
This product was added to our catalog on Monday 04 July, 2005.
Reviews
Please note, this is our OLD SITE!!!! It should be used for reference only!
To purchase product, please go to our new site at www.modtronix.com!
Customers who bought this product also purchased
LCD162B-GGN
LCD162B-GGN
SBC83IL
SBC83IL
PD216LCD-FHA
PD216LCD-FHA
PT24IP-TBPLUG
PT24IP-TBPLUG
TB10FS381
TB10FS381
TB12MP350
TB12MP350
 
Please note, this is our OLD SITE!!!! It should be used for reference only!
To purchase product, please go to our new site at www.modtronix.com!