The PT24E is a prototype board. It has been designed for a MicroX
SBC Main Board
to be plugged onto it, and to fit in a
enclosure. This board will normally be used together with a MicroX SBC Main board, an enclosure and
two enclosure panels (face plates). The picture on the right shows it mounted in an enclosure, with
an enclosure front panel. All terminal block contacts are
numbered on the enclosure panel. Additionally space has been provided to write something next
to each contact.
It is fully assembled, and supplied with the terminal block connector and plug as shown in the photo above.
There is plenty of prototype space for the user. All pins (CPU port pins and power) of
the two 2x24 pin daughter board connectors are available, and are clearly marked on the PCB.
Two 12 pin terminal block connectors are available for the users application.
There are also 6 LEDs on the board, connected to a shift register, and controlled by
port pins C0, C1 and C2. All LEDs have 1k resistors in series with them. Additionally space has
been provided to write something next to each LED.
The board schematics and PCB layout can be downloaded